Description
The Pulsar 510 Delta Full Ceramic Wax Atomizer is the official replacement concentrate attachment for the Pulsar 510 Delta 3-in-1 Smart Battery Vape Pen Kit. If your original wax atomizer is showing wear or you want a fresh spare on hand, this is the exact same full ceramic coil that shipped with your kit — swap it in and get back to clean, flavorful dabs in seconds. Full Ceramic Chamber with Omnidirectional Sidewall Heating
This isn’t a standard coil wrapped around a wick. The Delta Wax Atomizer features a full ceramic heating chamber that heats your concentrate from all sides simultaneously. This omnidirectional sidewall heating guarantees a smooth, even melt at any temperature setting — no hot spots, no wasted material sitting unvaporized on one side of the bowl. The result is pure, flavorful vapor with every session, exactly the way ceramic dabbing should taste. Ceramic Carb Cap Minimizes Splashback
Inside the silicone mouthpiece sits a ceramic carb cap insert that serves double duty. It restricts airflow into the chamber for better vapor density, and it catches any concentrate that might splash up during heating — keeping your mouthpiece clean and your draws smooth. Two sets of airflow intakes on either side of the mouthpiece let you fine-tune carb action for a tighter or more open draw, depending on how you like to dab. Proprietary Sub-Ohm Design — Exclusively for the Pulsar Delta
Important: This atomizer is only compatible with the Pulsar 510 Delta Smart Battery. Its proprietary sub-ohm resistance design is built specifically for the Delta’s smart detection system. When you screw it on, the Delta automatically recognizes the wax atomizer and switches to temperature control mode with 3 presets: Green (400°F), Blue (500°F), and Red (600°F). The LED fills Green and the device vibrates to confirm the connection — no manual mode switching required. This atomizer will not function properly on other 510 thread batteries or non-Pulsar Smart Devices. How to Use
Screw the wax atomizer onto your Delta battery. The LED fills Green and the device vibrates to confirm the connection and auto-switch to temperature mode. Detach the silicone mouthpiece to reveal the ceramic chamber and load a small amount of concentrate — start with about the size of a grain of rice. Reattach the mouthpiece, select your temperature with a single button press (Green 400°F, Blue 500°F, Red 600°F), then press the button 2 times to start the 12-second preheat cycle. During preheat, the indicator light slowly fills in. Once target temp is reached, the light goes solid and the device vibrates — your 20-second session has begun. Inhale gently as desired. The indicator light slowly depletes during the countdown. Be careful removing the mouthpiece after a session, as the silicone will still be slightly warm. Cleaning & Maintenance
For best performance and coil longevity, swab the atomizer chamber with a cotton swab and isopropyl alcohol after each use. For a deep clean, unscrew the atomizer from the battery, remove the silicone mouthpiece from the coil, and detach the ceramic carb cap from the mouthpiece top. Submerge the coil and carb cap in 99% isopropyl alcohol and let everything soak for about 1 hour. Remove any remaining residue with a cotton swab and allow all parts to fully air dry before reassembling. Regular cleaning prevents buildup and keeps your flavor pure session after session. Keep your Pulsar Delta dabbing at its best with a fresh ceramic wax atomizer. Browse more 510 wax atomizers, explore the full Pulsar collection, or check out our lineup of wax & dab pens at Discount Vape Pen. Package Contents 1x Pulsar 510 Delta Full Ceramic Wax Atomizer Note: This atomizer is only compatible with the Pulsar 510 Delta Smart Battery (sold separately). It will not work with other 510 batteries. Dimensions: 0.75″ x 1.59″ (19 x 40.5mm).
