Description
The Doric 20se pod kit from Voopoo is a great little MTL (Mouth to lung) pod kit. Containing a very respectable 1200mAh internal battery with 12watts of power which is perfectly matched for the 1ohm mesh ITO coil pre installed. This great little kit should last the average vaper a full day of uninterrupted vaping, when it runs out of power simply charge it using the enclosed USB-C charging lead. Specifications: Pod E-liquid capacity: 2 ml
Material: PCTG
Mod Material: Alloy
Output power: 12w
Draw Activated
Battery capacity: 1200 mAh
Dimensions: 118mm x 19mm Kit contents: 1 x Doric 20se
1 x ITO Pod 1 x ITO Coil, 1ohm (pre installed)
1 x Type-C Cable
1 x User Manual How to use your Doric 20se Vape Kit
Notes on changing coils
The Voopoo Doric 20se Vape Kit is easy to change or prime the coil just make sure the tank/pod is empty Pull Pod off the battery (it is held with magnets)
Pull out the old coil from the top section
Prime the new coil (see notes on priming coils) and check the wattage range (as you wont be able to see this later)
Push new coil back into the top section
Pull out the small bung
Fill your tank (see notes on filling your tank)
Set the devise to the wattage range on coil
Enjoy Notes on filling your Pod
The Doric 20se Kit has a simple fill method Take the pod off the battery section
Pull out the small bung
Slowly fill with liquid
Put bung back in
Put the pod back on the battery Notes on Priming Coils Always prime your coils well when using for the first time
Add 5 or so drops to the centre of the coil saturating the cotton
Reassemble the tank making sure the coil is secured in place
Add your chosen liquid to the tank
Take 5 or so long drags on your device without power
To be absolutely sure leave rested upright for a minute or so If your battery has a built-in battery If the battery is built into the device i.e. not removable always charge the battery with the lead provided and unless stated always using a 5v and 1amp USB Plug. Some plugs are designed for quick charging tablets and phones etc and this is too much too quickly for most vape devices. Please avoid usb sockets that are built into wall sockets as they can be much higher in current
