Description
Updated V3 released 02/2023.Load area has been reduced to 5/8″ bringing it closer to the heat source as well as a 1/2″ countersink below the screen providing a more efficient vapor path for significant extraction. Useful for a number in injector style units including the TiTi (sits on top), DC Elev8R (sits on top and MOST heaters experience seal problems so not ideal), Cannabis Hardware Injector diffuser for the B1 and B2, The B0, Musa V2, Supreme, Qaroma and others! Could be difficult to seal with the Terp Torch, Hot Rod and Freight Train so not really recommended there. Works with Herborizer Ti/DigiTi for a small loads only (cover the screen deck and not much more). Also works with the Neo (silicone ring required for perfect seal). 14mm male fitting to be compatible with 14mm female water pieces. Comes with 3 screens (5/8″). The V3 version also compatible with 22mm Cannabis Hardware diffusers including the F22! Also a perfect fit for the TKO by O’Connell Woodworks as well as the Thermal Twist! Hand made in Mississippi from Tigerwood. Tigerwoodhas a lot of color and grain variance so it may differ significantly from the picture. It’s also hand made so there may be some small fitment issues depending on your glass. Remember to remove the wood bowl from your water piece right after using it or it could expand and get stuck. You don’t want that! Cleaning:First off you should never soak or submerge any of the wood stems or adapters Ed makes. Simply take a cotton swab dipping it in high proof alcohol, squeeze out the excess then swab out the inner portion of the stem to remove any buildup doing this as needed. Let dry, you’re good to go.
