Description
5N/m, 150kHz, Controlled Radius Tip, Al Reflex Coating, 5-Pack DESCRIPTION
TIP SPECIFICATIONS CANTILEVER SPECIFICATIONS Building on Bruker’s flagship series of Tapping probes with rotated tip, the RTESPA-150-30 provides accurate nanomechanical mapping on soft samples in air with controlled end radius and laser Doppler vibrometer calibrated spring constants. End radii are controlled to 30nm +/- 15%. Spring constants are individually calibrated and guaranteed within 10% . Parameters are contained in the QR code on the box for fast and error free reading with the QR reader included with Bruker’s new PeakForce QNM high accuracy kit available for Dimension Icon. The moderately low nominal 5N/m spring constant is most suitable for soft polymer samples (typically in MPa range). For other samples, see the whole series of calibrated probes. – Nanomechanical mapping with FFV or PFQNM on Dimension Icon – Controlled 30nm end radius – Individually calibrated spring constant, 5N/m nominal – Parameters contained in QR code – One pack of 5 probes Tip Geometry:
Rotated (Symmetric) Tip Height:
10 – 15 Front Angle:
15 ± 2 Back Angle:
25 ± 2 Side Angle:
17.5 ± 2 Tip Radius (Nom):
30 Tip Radius (Max):
36 Tip Set Back (Nom):
9.5 Tip Set Back( RNG):
7 – 12 Aluminum reflective coating on the backside of the cantilever. The Al Reflective coating increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers, highly reflective samples, and machine vision applications. Cantilever Material:
0.01 – 0.025 Ωcm Antimony (n) doped Si Cantilever Thickness (Nom):
1.75 Cantilever Thickness (RNG):
1.0 – 2.5 Cantilever Geometry:
Rectangular Cantilevers Number:
1 Back Side Coating:
Reflective Aluminum
