Description
The All New Geekvape Aegis Max 2 21700 MOD or Max100 mod is smaller and lighter than the original. With the addition of their “A-Lock” which is a simple on off switch to protect against accidentally firing the device in your pocket or bag. Now with the addition of the new second generation of the Geekvape Tri-proof technology the Max 100 is not only IP68 water and dust resistant the mod is even more shock resistant. A single 21700 battery (sold separately) will power it up to 100w Emergency charging is done via the waterproof top charging slot which provides easy access and fast charging although we would recommend charging the batteries out of the device. Specifications Battery capacity – 1 x 21700 battery or 1 x 18650 Battery (Sold separately)
Output range – 5-100W
Resistance range – 0.1-3.0ohm
Dimensions – 93mm x 46 x 34mm
1.08 inch full colour display
Weight – 201g
Wattage / VPC / TC / TCR / Bypass
Temperature Control: 100℃~315℃ / 200℉~600℉
A-lock (Accidental Press Protection Lock)
Short circuit protection
Overheat protection
Overtime protection
0.02 second firing speed
IP68-rating: shockproof, waterproof and dust-proof Contents: 1 x GeekVape Aegis Max 2 mod
1 x USB-C charging cable
1 x 18650 battery adapter
1 x Spare parts
1 x Battery door assist tool For devices that use external cells. It is not recommended that users charge their separate cell devices with a usb lead in to the device. These devices can be charged via usb as an emergency measure but is not recommended as a permanent solution. This is not a line to sell chargers there are significant reason why it should be done externally. Do not assume that it is safe. These batteries are not made for vaping and the manufacturer has no idea what cells you are using. Best to use the safer solution of a named quality charger. Most vapes cannot balance charge more than one cell. One cell is charged and then after that the next cell is charged. All of the drain, excess heat and over use of that one cell causes strain on that 1st battery in the vape and ultimately leads to the demise of that 1 battery leading to the need of a new pair. If lucky it will just stop working if unlucky the cell may go into melt down
If your batteries are not the same age, ie the same amount of charges, the same amount of use and charged together for their whole lives then they are unbalanced. Meaning they cannot deliver the high output required by your vape. This will lead to low performance and low battery life.
External chargers let you monitor the charge going in to your cells. Good quality chargers will put what is needed in as opposed to as much as possible as fast as possible which can caused issues. A good charger will slow the charge rate down to recondition a bad cell. Internal charging will not do this. Using a good external charger could mean your batteries getting you through a day away from your charging equipment or not. Ultimately it is up to you how safe you want to be. Yes an external charger may sound like a hassle to you but it depends on the risks you want to take. Please make sure your external cells have perfectly intact wraps on them If they have any of the metal showing under the wrap or the insulator on top please either re wrap or buy new cells PS This is not to scare you If you have any doubts about your charging routine just ask. Batteries get warm when they charge but if they are red hot then its time to look into it
